Inspection tips for glassware products Part 2
Sunny Glassware will always stand by your side! Shenzhen Sunny Glassware co., LTD has focused on glass production and sales for 20 years，stickily to glass candle holder, red wine, beer, glass cup,and other glass products. Controls the glass productions strictly to ensure provide high standard products to our customers.Below are our QC team terms for glass inspection
6.Glass mouth cannot have bubbles within 1 cm (except products of the glass bubble effect), the mouth below the number of bubble diameter greater than 2 mm can't more than two or more than 1 mm diameter of bubble can't more than three grain, and the phenomenon of the bubble together is not acceptable.
7.After glass products back mould, fade temperature (fire) to ensure the stable quality, prevent the product will automatically burst after a period of time. The thermal stability of glass bottles should be, from hot water bad to worse, cold water temperature difference in 39 degrees commonly examination without damage by detecting,
8.Inside and outside of the glass cannot have obvious water ripple, surface and internal are not allowed to have a feel of lanes, such as obvious wrinkles and scars, grinding crack, such as cut marks and line, surface crack and not satisfied to its defects.
9.Glass mouth examination level off is smooth, no burr and bump, touch.
10.Inside and outside the glass must be cleaned, cannot have sundry, dust, tar, glass beads, etc. There can be no rust on glass products,Glass materials can't be mixed with black spots, dust and other sundry. Note: the rust on the glass products are usually used for faded when fire glass clamp with rust and die due to rust rusty spot on the glass, after cannot be removed. Clamp and die if rust, therefore, must in the first cleaning before production to avoid this problem. Need to pay attention to dissolve to avoid dust and impurities such as falling into the material, the product after forming internal containing impurities;
7.After glass products back mould, fade temperature (fire) to ensure the stable quality, prevent the product will automatically burst after a period of time. The thermal stability of glass bottles should be, from hot water bad to worse, cold water temperature difference in 39 degrees commonly examination without damage by detecting,
8.Inside and outside of the glass cannot have obvious water ripple, surface and internal are not allowed to have a feel of lanes, such as obvious wrinkles and scars, grinding crack, such as cut marks and line, surface crack and not satisfied to its defects.
9.Glass mouth examination level off is smooth, no burr and bump, touch.
10.Inside and outside the glass must be cleaned, cannot have sundry, dust, tar, glass beads, etc. There can be no rust on glass products,Glass materials can't be mixed with black spots, dust and other sundry. Note: the rust on the glass products are usually used for faded when fire glass clamp with rust and die due to rust rusty spot on the glass, after cannot be removed. Clamp and die if rust, therefore, must in the first cleaning before production to avoid this problem. Need to pay attention to dissolve to avoid dust and impurities such as falling into the material, the product after forming internal containing impurities;
Every order is coming from through Sunny QC inspection team to confirm the quality of the product after delivery to the client, and QC will supervise the loading process through out, confirm the product is in good condition to clients. Beautiful thing straight pay close attention to the quality of glass products, focus on customer concern and apprehension, high-standard, strict production of glass products; Also this have been trying to get customer's affirmation and praise, Sunny glass will continue to be strict with themselves, to provide customers with high levels of product.
No comments:
Post a Comment